A description of a Java program to facilitate data acquisition and analysis using a Tektronix TDS3000 series oscilloscope and applied to micro-channel photo-multiplier tubes is provided. Final report on Summer 2010 ANL student Intern project of Paul Drake. In addition...
A goal of the LAPPD project is to be able to develop advanced MCP-PMT's using simulation to optimize the many parameters. This will require a realistic simulation of each step in the generation of the final digital output, including the...
In order to edit the "I told you so page". Go to: psec/web/psec/library/paul/
Analysis of data taken with a 10 um MCP on Tang's transmission line card with 18, 50, 158PEs at Ed May's laser test stand.
In this little note we describe the electrical circuit for the large-area MCP-PMT development, including a scheme for an internal HV distribution. This current string, which is composed of series-resistors with stiffening capacitors, supplies current to the photocathode and micro-channel...
This is an old note, from July 2006, but may have some things of interest. HJF Abstract: One limiting factor in the speed of a 2-inch by 2-inch MCP is the inductance in the path that charge has to flow...
PDF of the results of Guilherme Nettesheim's detector window simulation.
Tar of simulation for cherenkov light in window simulation
RE: Evaluation of GO18-223 Frit Applied to B33 Glass (Borofloat) UPDATE This document has been updated to include results based on building small assemblies consisting to a top plate, bottom plate and side walls, using B33 glass and G018-223 Frit....
Sep 3 2009 internal report intership report design report
Bernhard Adams,
Mike Albrow,
John T Anderson,
Klaus Attenkofer,
Karen Byrum,
Gary Drake,
Henry J Frisch,
Jean-François Genat,
Mary Heintz,
Edward May,
Richard Northrop,
Erik Ramberg,
Anatoly Ronzhin,
Greg Sellberg,
Ossy Siegmund,
Fukun Tang,
Jerry Va'vra and
Gary Varner
April 22, 2009 text of proposal to DOE for Detector Development. Version with no budget information.
June 11, 2004 Note converted from ps to pdf format.
2004 Paper submitted to Rome Italy, IEEE04 Conference. Abstract: We propose to measure the velocity of particles produced at a hadron or lepton collider by measuring the timeof- flight in a finely segmented cylindrical geometry, in which the particles product...
2005 Detector Development Proposal
July 20, 2006 One limiting factor in the speed of a 2"x2" MCP is the inductance in the path that charge has to ow from the anode back to the source of the charge, the micro-channel plate output. In this...
June 3, 2009, Student final report on MCP with Transmision Line readout, time resolution as function of Pore size.
June 1, 2009: Prepared in partial fulfillment of the requirements of the Office of Science, Department of Energy's Science Undergraduate Laboratory Internship under the direction of Edward May and Karen Byrum at the High Energy Physics Division, Argonne National Laboratory....
Determination of Gain as function of High Voltage. Measure time resolution of 25um and 10um pore Burle photo-tubes equipped with transmission line readout board using ANL Laser test stand. May 2009.
