Gerber files are under pad-pickup-64-gerber folder. There are 64 minus 4 square pads on the front layer, four corner pads excluded. This is because only 60 channels are available. Each pads are labeled from 1 to 64, horizontal then vertical...
Anode Pad Sharing NIM Paper as Published: Nuclear Inst. and Methods in Physics Research, A 985 (2021) 164702; 22 Sept, 2020 \\~~~~~~~~~~~~~ Abstract: Micro-channel-plate-based photo-detectors are unique in being capable of covering very large areas such as those required in...
Wine and Cheese seminar at Fermilab. August 21, 2020.
We have designed and prototyped the process steps for the batch production of large-area micro-channel-plate photo- multipliers (MCP-PMT) using the “air-transfer” assembly process developed with single LAPPDTM modules. Results are presented addressing the challenges of designing a robust package that...
This document describes MCenter experimental area and how to use G4beamline simulation in order to test LAPPD Time-of-Flight.
A report describing the testing of an ANNIE central card based PSEC4 readout system. Includes recipes on how to work with the ACDC and ACC boards.
Abstract: The LAPPD Collaboration was formed to develop ultrafast large-area imag- ing photodetectors based on new methods for fabricating microchannel plates (MCPs). In this paper we characterize the time response using a pulsed, sub- picosecond laser. We observe single-photoelectron time...
Talk given at HEP Lunch Seminar at the University of Chicago.
Collection of Tyler's documents on the MCP Scrubber
Talk at SCINT 2013 on LAPPD
Short Introductory talk at the Dec 18/19 DOE review at Argonne
Anode paper as resubmitted to NIM-A with reply to reviewer and cover letter
This is a list of LAPPD Publications Oct 1 2009- July 2012 compiled by Karen for the July DOE review. If you have a publication you would like added please holler.
Invited APS 2012 talk on the LAPPD project.
A draft document describing some issues with respect to the interactions of the High Level DAQ (ie on DAQ PC) and the DAQ device Firmware. Specific application to 160 channel PSEC3/4 center card FPGA configuration. Dec 2, 2011 Ed May
TIPP 2011 Proceedings - Last submitted version
Powerpoint update on Microchannel plates.
RE: Evaluation of GO18-223 Frit Applied to B33 Glass (Borofloat) UPDATE This document has been updated to include results based on building small assemblies consisting to a top plate, bottom plate and side walls, using B33 glass and G018-223 Frit....